What are you looking for?

+86 137 5017 8582
Your Position:Home>News>Industry News>The Reasons Of Using Fluorocarbon Spraying For Aluminum Doors
Contact Us

+86 137 5017 8582

+86 763 3699 786

Taiji industrial City, High-tech Development Zone, Qingyuan City, Guangdong Province, P.R. China.


The Reasons Of Using Fluorocarbon Spraying For Aluminum Doors

Time:27 December 2016 Click:431

On one hand fluorocarbon spraying is electrostatic spray, and on the other hand it is also a kind of liquid spraying which is known as fluorocarbon coating. It is called curium oil in Hong Kong. The price of fluorocarbon spraying is relatively high as it is high-grade spray. Besides, it has long been applied in foreign countries.


Although the cost of fluorocarbon paint sprayed aluminum doors and windows is slightly higher, but the quality is much better than ordinary spray. The common sun room, Kentucky door, revolving door and other aluminum profiles all use high temperature baking fluorocarbon.

Fluorocarbon paint refers to the coating mainly contains fluorine resin as film forming material. Among the various coatings, fluororesin coatings have strong carbon fluoride bond, weather resistance, heat resistance, low temperature resistance, chemical resistance and unique non-stick performance and low friction performance due to the introduction of fluorine element.

1, excellent corrosion resistance - thanks to excellent chemical inertness, the film acid, alkali, salt and other chemical substances and a variety of chemical solvents, it provide a protective barrier for the substrate; the tough film - high surface hardness, Impact resistance, buckling resistance, good wear resistance. It also shows excellent physical and mechanical properties.

2, maintenance-free, self-cleaning - fluorocarbon coating has a very low surface energy, the surface dust can be self-cleaned by rain. It has the advantages of excellent hydrophobic (maximum water absorption is less than 5%), anti-oil, minimal friction coefficient (0.15 - 0.17) and good anti-fouling performance.

3, strong adhesion - it basically can be attached to any material. For it shows excellent adhesion to aluminum, copper, stainless steel, polyester, polyurethane, vinyl chloride, cement, composites and other materials. High decorative - it can achieve more than 80% of the high gloss in 60 degrees gloss.

4, long time endurance - coating contains a lot of F - C bond which determines its superior stability, non-powder and anti-fade. The service life is up to 20 years with excellent performance than any other coating.