GH METAL PRODUCT CO., LTD. Search

What are you looking for?

English
+86 137 5017 8582 Email:carinacao@hao-mei.com
Your Position:Home>News>Industry News>Selection Knowledge of Industrial Aluminiumprofile
Contact Us

+86 137 5017 8582

+86 763 3699 786

Taiji industrial City, High-tech Development Zone, Qingyuan City, Guangdong Province, P.R. China.

carinacao@hao-mei.com

  • GH METAL PRODUCT CO., LTD.

Selection Knowledge of Industrial Aluminiumprofile

Time:29 August 2016 Click:326

Unlike other profiles, industrial aluminum product selection is very strict. Aluminiumprofile products in industrial use must with superior load-bearing capacity, tensile strength and toughness. There are four points should be keep in mind when selecting quality aluminiumprofile:

First: Industrial aluminum chemical composition
Second:Mechanical properties of industrial aluminum
Third:Industrial aluminum tolerance

Fourth:Industrial aluminum extrusion deformation calculation

Selection Knowledge of Industrial Aluminiumprofile



Currently industrial aluminum market competition is pierce, aluminum companies in order to occupy more market share, they do much on the product itself. Some of them want earn more by reducing working process and chemical material, thus, causing much loss to customers. Therefore, clients should take aluminumprofile quality, making process, chemical component and bearing capability into consideration instead of just price.

The industrial alu profile mechanical performance parameters can be referred when choosing aluminumprofile. Aluminum selection of physical stress analysis must be considered to prevent unnecessary losses such as deformation collapse caused by wrong choices. Aluminum mechanical performance mainly include three aspects: load-bearing capacity, tensile strength and toughness.

Industrial aluminum tolerance range mainly contain parallelism, straightness, twist three aspects. It refers to the subtle tolerance result from the products’length.

1: Parallelism analysis: Within 5700mm, aluminum plane parallel line and the slot line parallelism should not be more than plus or minus 0.05mm.
2:Straightness analysis: Within 300mm, it should be more than plus or minus 0.05mm while within 2000mm, not more than plus or minus 1.5mm.
3:Twist analysis:It should be less than 1.5mm within 300mm.