What are you looking for?

+86 137 5017 8582
Your Position:Home>News>Industry News>Aluminum Surface Sandblasting Technology
Contact Us

+86 137 5017 8582

+86 763 3699 786

Taiji industrial City, High-tech Development Zone, Qingyuan City, Guangdong Province, P.R. China.


Aluminum Surface Sandblasting Technology

Time:29 August 2016 Click:476

With the rapid development of the domestic industrial and infrastructure investments,the aluminium profile industry also increases rapidly. After ten years rapid development, the aluminum industry has entered to a new stage. For aluminum, the surface sandblasting process will be a new trend.

Aluminum surface sandblasting technology has been widely applied, mainly used in automobile manufacturing, rail transportation, machinery and equipment manufacturing, and other industrial fields. Sandblasting process technology does good effect on aluminum surface hardness adjustment and bulk density. It is no free silica,environmentally friendly and with good toughness.

Aluminum sandblasting process is the use of high voltage electrostatic field corona principle. Connect the gun head-a part of aluminum sandblasting process tool to the negative high voltage. Then have the coated work piece connected with ground to form positive electrode. So there will be a strong static electric field produced between the gun and the work piece.

When the carrier gas-compressed air transmit the powder coating to the gun rod diversion from the powder barrel,there will be densive negative charge around the powder, for the connected diversion rod produce high voltage. After the powder enter into the electrostatic field, under the double effect of static electricity and gas carrier, they will be sprayed on the ground surface evenly while forming well-distributed powder layer. Next, heating and solidifying the powder layer into a durable coating. The general construction process of aluminum surface sandblasting technology: pre-treatment, drying to remove water, spraying ,check, baking, check-finished.

There are various abrasive material such as iron ore, steel grit, ceramic sand, alumina, quartz sand, silicon carbide, etc. Abrasive material should be choosed according to the aluprofile surface and production requirements.

 Aluminum Surface Sandblasting Technology

Prev:No information

Next:Survival through Multiple Transition